Husqvarna 1-10DPS75 Bedienungsanweisung Seite 21

2. Clean the chain with cleaning agent.
3. Remove dirt from internal parts of the chain.
To replace the control cage
1. Remove the feed spout.
2. Remove the cage clamps and the control cage.
3. Install the control cage in opposite sequence.
To replace the blastwheel
1. Remove the feed spout and the control cage. Refer
To replace the control cage on page 21 .
to
2014 - 002 - 06.04.2023
2. Remove the nuts of the blastwheel cover.
3. Install M10 bolts on the welded nuts.
4. Turn the M10 bolts to release the blastwheel cover
from the blast housing.
21