Husqvarna 1-10DS Bedienungsanweisung Seite 30

5. Push and hold the overdrive button (A) to move at
maximum speed.
6. Push and hold the forward button (B) to move the
product forward.
To move the product up and down a
ramp
WARNING:
move the product up and down ramps. The
product is heavy and there is a risk of injury
if the product falls or moves too quickly.
WARNING:
slope, always use a winch. Do not walk or
stay below or near the product.
• To move the product down a ramp, operate the
product forward slowly.
• To move the product up a ramp, operate the product
rearward slowly.
• Do not turn the product to the left or to the right more
than 45° on a ramp.
To lift the product 1-10DS
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
30
Be very careful when you
For ramps with a steep
Make sure that the lifting
Do not walk or stay below
Do not lift a damaged
1. Attach the lifting equipment at the lifting eyes.
2. Lift the product safely. Hold the handle until the
product is lifted off the ground.
To lift the product 1-15DS
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
Make sure that the lifting
Do not walk or stay below
Do not lift a damaged
2070 - 004 - 06.04.2023