Error Messages On Your Display - Gazelle Innergy Serie Bedienungsanleitung

Error messages on your display

• Y our display can show error messages. Below it
is explained what the messages mean and what
action you need to take.
• O n the lower right of your display the indication
"Err" will show, followed by a number. "Err" stands
for error message. The decimal in the speedometer
forms the second part of the error message.
• If the display shows a wrench, it means
that you have to take the bike to the dealer and
that you can't ride with pedal assistance.
Err 1.1 This battery is not registered for this
bike
You can't ride with this battery because the bike doesn't
recognise the battery's serial number. Go back to the
dealer with your bike, the receipt and the battery. Your
dealer will register this and other batteries for you.
This also applies to, for instance, the battery from your
spouse's bike or a spare battery. As long as the dealer
hasn't registered this battery, the pedal assistance will
not function. (Photo 31)
Tip: If more people in your household own a Gazelle
Innergy, have the dealer register all batteries in all
bikes. Then it doesn't matter what battery you put
in what bike.
Err 1.2 Battery temperature (was) too high when
charging
The battery temperature has exceeded 55°C (131°F).
Make sure that the bike is not exposed to direct sunlight
or is parked against a heater. If you charge the battery
separate from the bike, make sure that it doesn't sit on
or next to the heater or in direct sunlight. As soon as
the battery has cooled off, it will resume charging. This
message will disappear from the display automatically.
If you frequently get this message, we request you to
contact your dealer. (Photo 32)
The display
31
32
75