Troubleshooting Guide - Bellman & Symfon Audio Maxi BE2020 Gebrauchsanweisung

Troubleshooting
You can carry out a number of checks yourself before sending a product for repair.

Troubleshooting guide

Symptom
Nothing happens when you try to start Maxi
using the On/Off button.
No sound can be heard in the headphones when
Maxi is switched on.
A high-pitched noise is heard in the headphones.
BE2020_005MAN014_book.indb 65
Solution
• Check that the batteries have been
inserted the right way round.
• Change the batteries. Only use AA
alkaline type batteries.
• Check that the correct signal source has
been selected, e.g. internal microphone
(M position).
• Check that the headphone plug is
securely inserted in the headphone
output.
• Connect the headphones to
another sound source (with a 3.5
mm headphone output) to test the
headphones.
• Lower the volume or increase the
distance between Maxi and the
headphones.
• Direct the microphone away from you.
65
2009-09-03 16:52:03