Adjusting Settings - Bellman & Symfon Audio Maxi BE2020 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Audio Maxi BE2020:

Informationen zu medizinprodukten (16 Seiten)

Bedienungsanleitung (42 Seiten)

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

control bc (9). c moves the sound towards the right channel and b moves the sound towards

the left channel. The current setting is indicated by a flashing dot on the Volume and Tone LED

Indicator (8) which moves towards the right or left.

When the desired value has been set, give a short press on the Setting button (15) and Maxi will

move on to setting the maximum volume.

• Adjust the maximum volume using the volume control bc (9). c increases the maximum

volume and b reduces the maximum volume. The current attenuation setting relative to the

maximum volume is displayed via the Volume and Tone LED Indicator (8). No attenuation is

shown by only one LED being visible at the right. The greater the attenuation the more LEDs

come on from right to left. Each increment and hence each lit LED corresponds to a reduc-

tion of 3 dB.

When the desired value has been set, give a short press on the Setting button (15) and Maxi

will move on to the setting for locking the T position.

• Now set the use of the telecoil to locked or unlocked using the volume control bc (9). c

enables use of the telecoil and b blocks use of the telecoil. When the telecoil is activated, the

Telecoil LED (4) blinks and when the function is blocked the Telecoil LED (4) is off.

• When the desired value has been set, there are three options:

To start again: give a short press on the Setting button (15) and Maxi starts again with

setting the balance above.

To save: press the Setting button (15) for about 5 seconds and Maxi saves the settings

that have been adjusted and returns to normal mode.

To change your mind: press the On/Off button h (5) and Maxi will disregard all the

settings that have been adjusted and return to normal mode.

BE2020_005MAN014_book.indb 63