Introduction; Device Description; Scope Of Delivery; Proper Use - Parkside PBLS 26 A1 Bedienungs- Und Sicherheitshinweise

2. Introduction

MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised special-
ists.
• Installing and replacing non-original spare parts,
• Application other than specified.
Please consider:
Read through the complete text in the operating manual be-
fore installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its applica-
tion possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all
operating personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect
to the associated hazards. The required minimum age must
be observed.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of identi-
cal devices must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
22 GB

3. Device description

1. Flat nozzle (blast pipe)
2. Round nozzle (blast pipe)
3. Locking screw (nozzle)
4. Blast pipe
5. Locking screw (blast pipe)
6. Blast connection (motor unit)
7. Throttle lock
8. Throttle
9. Top handle
10. Motor unit
11. Protective grille (vacuum connection)
12. Suction nozzle (vacuum tube)
13. Locking screw (vacuum tube)
14. Vacuum tube
15. Choke lever
16. On/Off button
17. Spark plug connector cover
18. Outlet tube
19. Fuel pump (primer)
20. Start pull cord
21. Bottom handle
22. Fuel tank
23. Tank cap (fuel tank)
24. Collection bag
25. Cover (air filter)
26. Air filter screw
27. Mixing container
28. Spark plug wrench
29. Vacuum connection
30. Spark plug connector
31. Foam insert (air filter)
32. Fleece insert (air filter)
33. Metal insert (air filter)

4. Scope of delivery

• Flat nozzle (1)
• Round nozzle (2)
• Blast pipe (4)
• Motor unit (10)
• Suction nozzle (Vacuum tube) (12)
• Vacuum tube (14)
• Outlet tube (18)
• Collection bag (24)
• Mixing container (27)
• Spark plug wrench (28)

5. Proper use

The petrol leaf vacuum and blower can be used to remove
leaves, grass, paper, etc., e.g. in gardens, sports stadiums, car
parks or driveways. It is also suitable for blowing clear stalk-
ing paths in the forest.
The petrol leaf vacuum and blower is also designed for vacu-
uming and shredding leaves and other light, loose and non-
combustible waste.