Silvercrest SLBP 5 A1 Bedienungsanleitung Seite 20

NOTE
► The next time you turn on the speaker, it will connect automatically to
the last-connected Bluetooth
playback device does not automatically reconnect to the speaker, you
will have to re-establish the connection manually. A detailed descrip-
tion of how to do this can be found in the operating manual for your
Bluetooth
► If no Bluetooth
playback device can be made within 3 minutes, pairing mode ends
and the speaker switches back into pairing mode automatically. After
3 minutes, LED 1
alternately blue and orange.
► If no Bluetooth
mode ends and the speaker switches off automatically.
► If no playback takes place within 10 seconds, the device switches
itself off automatically.
► Ensure that the speaker is no more than 10 metres away from the
Bluetooth
or electronic devices placed between them.
SLBP 5 A1
playback device.
®
connection to the last-connected Bluetooth
®
0
stops flashing rapidly blue and starts flashing
connection can be made within 10 minutes, pairing
®
playback device. Make sure that there are no barriers
®
playback device. If your Bluetooth
®
®
GB │ IE │
17
®
■