Control Board; Menu Structure - EuroLite LED THA-450F Theater Spot Bedienungsanleitung

Control Board

The Control Board offers several features: you can set the starting address, program the desired dimming
curve or make a reset.
Press MODE to enter the main menu. Browse through the main menu by pressing Up or Down. Press Enter
in order to select the desired menu. You can change the selection by pressing the UP or DOWN buttons.
Press ENTER in order to confirm your choice. You can leave every mode by pressing MODE. The functions
provided are described in the following sections.

Menu structure

Default settings shaded.
Main menu
SET ADDRESS
USER MODE
Status
Fan.Set
Display
Dimmer Curve
Dim.Freqs
Dim Modes
Load
Fixture Life
Time
Fix Last Run
Time
Total Lamp
Hours
Time. Info
Sub menu
A001 ~ XXX
Channel Mode:01 / 02 / 04 / 06 / 07
No DMX Mode Close
Auto
Low
Head Fan
High
Quiet
OFF/10s – 10min
Backlight
50s
Key lock ON/OFF
The increase in light intensity appears to be linear as
Linear
DMX value is increased
Light intensity control is finer at low levels and coarser at
Square
high levels
Light intensity control is coarser at low levels and finer at
I-Square
high levels
Light intensity control is fine at low levels and high levels
S-Curve
and coarser at medium levels
1200/1300/1400/1500/2500/4000/
5000/6000/10K/15K/20K/25K Hz
LED
Halogen
no/yes
Power On Time
XXXX Hours
Power On TimAbleRed
XXXX Hours
Power On Time Reset
Passcode=038
XXXXXX Hours
Current
XXX F / XXX C
Max Resettable
LED´S
XXX F / XXX C
Max Not Resettable
XXX F / XXX C
31/44
Display
DMX address setting
DMX channel mode
Modes if no DMX
Hold Last
/
Adjust fan speed
Display shutoff time
Key lock activation
PWM (Puls Width Modulation)
Dimmer speed
LED: Response characteristics of
LEDs
Halogen: Response characteristics
of halogen lamps
Restore factory settings
Record of the power-on time of the
device (it is deleted when the
device is switched off).
Record of the power-on time of the
device, it will not be deleted when
the power is turned off. (It can be
deleted by entering the password).
Reset time
Passwort: 038
The total time since the device was
turned on (it cannot be set to 0).
Current temperatur ℃/℉
Display of max. reached
temperature
Display of max. reached
temperature (cannot be deleted)
Function
00144838, Version 1.0