EuroLite LED THA-450F Theater Spot Bedienungsanleitung Seite 33

Linear
Dim.Freqs
With this function the PWM frequency of the LEDs can be set.
Dim Modes
This function indicates the dimmer speed, response characteristics of LEDs or response characteristics of
halogen lamps.
Load
With this function, you can reset the device to the default setting. Set Load to "yes".
Information
Fixture Life Time
This "Power On Time" function is used to record the temporary operating hours of the device since it was
switched on. These are deleted again when the device is switched off. The display shows "XXXX", "X"
stands for the number of hours.
Fix Last Run Time
With this function "Power On TimAbleRes" the operating hours of the device can be read out, they are not
deleted when switching off. Deletion only possible with password entry. The display shows "XXXX", "X"
stands for the number of hours.
Use the "Power On Time Reset" function to reset the individual operating hours of the device. The password
is "38".
Total Lamp Hours
This function can be used to read the total time the unit has been on. (it cannot be set to 0). The display
shows "XXXX", "X" stands for the number of hours.
Temp. Info
Current
With the "Current" function, the current temperatures inside the device can be read out in degrees
Celsius/degrees Fahrenheit, since the device was switched on. The display shows "XXX F / XXX C".
Max Resettable
Display of the max. reached temperature in degrees Celsius/degrees Fahrenheit. The display shows "XXX F
/ XXX C".
Max Not Resettable
Display of the max. reached temperature in degrees Celsius/degrees Fahrenheit. . The display shows "XXX
F / XXX C". Cannot be cleared.
Last Max Temp Reset
Use the "Last Max Temp Reset" function, to reset the max. reached temperatures inside the device. The
password is "43".
33/44 00144838, Version 1.0