EuroLite LED THA-450F Theater Spot Bedienungsanleitung Seite 32

Product IDs
Error. Logs
Software
version
Reset. Motor
Panel. Ctrl.
Calibrate
Set Address
With this function, you can set the desired DMX-starting address via the Control Board.
User mode
With this function, you can set the DMX channel mode.
Function
Status
Close
Here you can close the shutter and set the device to center position if there is no DMX-signal.
Hold Last
Here the device remains in the last received DMX-program if there is no DMX-signal.
Fan. Set
With this function, you can adjust the ventilation fan mode.
Display
Backlight
With this function you can shut off the display after 10 seconds to 10 minutes.
Key lock
With this function, you can lock the buttons of the Control Board to e.g. prevent menu tampering. If this
function is activated, the buttons will be automatically locked in 15 seconds from the last command. In order
to deactivate or temporarily deactivate the key lock function, press the MODE button for 10 seconds to
regain access to the menu commands.
Dimmer Curve
With this function, you can set various dimmer curves.
LINEAR: the increase in light intensity appears to be linear as DMX value is increased.
SQUARE LAW: light intensity control is finer at low levels and coarser at high levels
INVERSE SQUARE LAW: light intensity control is coarser at low levels and finer at high levels
S-CURVE: light intensity control is fine at low levels and high levels and coarser at medium levels.
Last Max Temp Reset
Password 043
RDM UID
29AA 0324 000-FFF
Fixture Errors
Rest Error Log
Yes/NO
V X.XX
Zoom
Dimmer 000-255 Strobe 000-255
Red 000-255 Green 000-255
Blue 000-255 Lime 000-255
Zoom 000-255
-Password-050
Focus 000-255 Red 000-255
Green 000-255 Blue 000-255
Lime 000-255
32/44
Reset of max. reached
temperature, with
Password: 043
RDM PID Code
(Temp., Fan, Zoom Error)
Password: 050
Software version
Zoom reset
Manual adjustment
Zoom setting and white balance
00144838, Version 1.0