Settings For The Io-Link Variant - Emerson AVENTICS AF2 Betriebsanleitung

Objective Submenu
Set the port Port
Reset the user-defined pass- ResetPW
word
Webserver State
Port
ResetPW
Fig. 21
OPC UA
Objective Submenu
Switch the web interface on State
and off
Set the port Port
Set the user name User
Assign a password Password
OPC UA State
Port
User
Password
Fig. 22
MQTT
Objective Submenu
Switch the web interface on State
and off
Broker Broker
Set the port Port
Topic Topic
User User
Create the broker password Password
Send the update interval to Update
the broker
QoS QoS
Define MQTT message to the Send
broker
AVENTICS™ AF2 | R412026496–BAL–001–AB | English
Option
Select the web server port.
The default port for the HTTP
service is port 80
Reset the web server pass-
word for the "Maintenance"
user to factory default. The
default password (factory set-
ting) is "airflowsensor"
Active
Inactive
abort store
#####
abort store
(action required)
abort store
Option
Select between Active and In-
active
Set the port
Set the user name
Set the password
Active
Inactive
abort store
#####
abort store
# ... #
abort store
# ... #
abort store
Option
Select between Active and In-
active
Set the broker
Set the port
View the topics
Enter a user name for the bro-
ker
Enter the broker password
Set the update interval
Select QoS-0, QoS-1, or QoS-2
Select a menu item from the
second submenu and set to
Active or Inactive
MQTT State
Broker
Port
Topic
User
Password
Update
QoS
Fig. 23
Send
Fig. 24

8.4.3 Settings for the IO-Link variant

The settings apply to all variants of the flow sensor with IO-Link electrical connec-
tion.
IO-Link
The display shows the measured value menu with the default setting (kg/h, m/s).
Objective Menu
Select menu Standard screen
Set the switch output Q1 Menu
Set the switch output Q2 Menu
Active
Inactive
abort store
### ### ### ###
abort store
#####
abort store
######/#/####
abort store
######
abort store
######
abort store
##### ms
abort store
QoS0
QoS1
QoS2
abort store
Unit Active
Inactive
abort store
MassFlowRate Active
Inactive
abort store
FlowVelocity Active
Inactive
abort store
VolFlowRate Active
Inactive
abort store
Volume Active
Inactive
abort store
Mass Active
Inactive
abort store
Energy Active
Inactive
abort store
Temperature Active
Inactive
abort store
Pressure Active
Inactive
abort store
AdditInfos Active
Inactive
abort store
AppStatistic Active
Inactive
abort store
Option
Press and hold any arrow but-
ton for at least 2 seconds and
select between Q1 Menu,
Q2 Menu, and Qa Menu.
Set the switch output
Set the switch output
34