Emerson AVENTICS AF2 Betriebsanleitung Seite 32

Objective Submenu
Selecting the signal quality SigQuality
Measure Flow
Fig. 14
AVENTICS™ AF2 | R412026496–BAL–001–AB | English
Option
Select between SigQua1,
SigQua2, SigQua3, and
SigQua4. Quality is set to
100 % in each case. Signal
quality 1 is a measure of ro-
bustness
Medium Air
Argon
Helium
CO2
Nitrogen
abort store
RefCond S I O 8 7 7 8
User Defined
ISO2533
ISO1217
DIN1945-1
DIN1343
ISO6358
abort store
RefPress ## # bar
abort store
RefTemp ## # °C
abort store
0-FlowOff ## #
abort store
0-FlowCut ## ##
abort store
Filter OFF
100 ms
200 ms
500 ms
1 s
2 s
5 s
10 s
abort store
Mode Standard
(read only)
abort store
Pressure
Temperature
SigQuality
Fig. 15
History
Objective Submenu
Select the display/graph 60 min
showing the measured values
for the last 60 minutes
Select the display/graph 24 hour
showing the measured values
for the last 24 hours
Select the display/graph 7 days
showing the measured values
for the last 7 days
History 60 min
24 hours
7 days
Fig. 16
Statistics
Objective Submenu
Minimum values, mean val- View
ues, and maximum values for
the individual parameters af-
ter the last reset
View the time of the last reset LastReset
(read only)
Reset the statistics values to 0 Reset
Offset ##.# bar
abort store
Filter OFF
100 ms
200 ms
500 ms
1 s
2 s
5 s
10 s
abort store
Offset ##.#°C
abort store
Filter OFF
100 ms
200 ms
500 ms
1 s
2 s
5 s
10 s
abort store
SigQua1 ### %
(read only)
abort store
SigQua2 ### %
(read only)
abort store
SigQua3 ### %
(read only)
abort store
SigQua4 ### %
(read only)
abort store
Option
Select the display/graph
showing the measured values
for the last 60 minutes
Select the display/graph
showing the measured values
for the last 24 hours
Select the display/graph
showing the measured values
for the last 7 days
Dynamic charts:
MassFlowRate
Pressure
Temperature
Energy
Mass
VolumetricFlowRate
Volume
FlowVelocity
abort store
Option
View the Max, mean, min val-
ues for the individual parame-
ters after the last reset
View the time of the last reset
Reset the statistics values to 0
32