Settings For The Ethernet Variant; Webserver - Emerson AVENTICS AF2 Betriebsanleitung

Statistics View
LastReset
(read only)
Reset
Fig. 17
Counter
Objective Submenu
View the counter
Reset the counter Reset
Counter Mass (read only)
Volume (read only)
Energy (read only)
LastReset
(read only)
Reset
Fig. 18
System
Objective Submenu
Service login Service
Reset to factory settings FactReset
Serial Number (read only) SerialNumber
Set the device tag DevTag
Set the Application tag AppTag
FWVersion (read only) FWVersion
Calibration (read only) Calibration
BLVersion (read only) BLVersion
HWVersion (read only) HWVersion
AVENTICS™ AF2 | R412026496–BAL–001–AB | English
max, mean, min values:
MassFlowRate
Pressure
Temperature
VolumetricFlowRate
FlowVelocity
abort store
(action required)
abort store
Option
Select from the Mass, Volume, En-
ergy, and LastReset submenus and
view the counter
Reset the counter
(action required)
abort store
Option
Perform a service login for au-
thorized users
Reset the system to the fac-
tory settings
View the part number (serial
number)
Set the device tag
Set the Application tag
View the firmware version
View the firmware defaults
View the bootload version
View the hardware version
System Service
FactReset
SerialNumber
(read only)
DevTag
AppTag
FWVersion
(read only)
Calibration
(read only)
BLVersion
(read only)
HWVersion
(read only)
Fig. 19

8.4.2 Settings for the Ethernet variant

The settings apply to all variants of the flow sensor with Ethernet electrical con-
nection.
Ethernet
Objective Submenu
Assign a static or dynamic ad- DHCP Mode
dress
Set the IP address IP Address
SubNetMask SubNetMask
Gateway Gateway
Name Name
Screen 1.1 Screen 2.1
(Kg/h) Display 1 Top 60 min
(m/s) Display 1 Btm (m/s)
Screen 1.2 Screen 2.2
(m³) Display 2 Top 24h
(m³/h) Display 2 Btm
Screen 1.3 Screen 2.3
(kg) Display 3 Top 7days
(kWh) Display 3 Btm
Hold for menu
Ethernet DHCP Mode
IP Address
SubNetMask
Gateway
Name
Fig. 20
Web server
Objective Submenu
Switch the web interface on State
and off
#_#_#_#
abort store
(action required)
abort store
###
abort store
###
abort store
Option
Assign an address
Set the IP address
Set the subnet mask
Set the gateway address
Set the DHCP name
Events Status Signal
Info
Signal Quality
Info
Serial No.
Firmware
Static IP
DHPC Client
abort store
### ### ### ###
abort store
### ### ### ###
abort store
### ### ### ###
abort store
### ### ### ###
abort store
Option
Select between Active and In-
active
33