Scope Of Delivery; Transport And Storage; Transporting The Product; Storing The Product - Emerson AVENTICS AF2 Betriebsanleitung

• Ensure that the latest released software and firmware versions are installed on
all products connected to the network.

3 Scope of delivery

• AS Ethernet variant
– 1x Operating instructions R412026496
– 1x Sensor/filter combination (see: Ordered configuration)
• AS IO-Link variant
– 2x Operating instructions R412026496, R412027828
– 1x Sensor/filter combination (see: Ordered configuration)
• HF Ethernet variant
– 1x Operating instructions R412026496
– 1x sensor (see: Ordered configuration)
• HF IO-Link variant
– 2x Operating instructions R412026496, R412027828
– 1x sensor (see: Ordered configuration)
You have customized your product with the Emerson internet configu-
rator. In individual material number is generated during configuration.
This material number exactly matches the delivered configuration.

4 Transport and storage

4.1 Transporting the product

Hazards during transportation
To eliminate risks during transport, observe the following instructions:
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings (accident prevention, material protection).
• Do not stand under suspended loads (accident prevention).
WARNING! Risk of serious injury from falling loads. Only qualified personnel
may be entrusted with the independent use of transport equipment, lifting
gear and load handling attachments. The personnel must be of age, appropri-
ately trained and instructed, and must be aware of the dangers involved in
handling load handling attachments and lifting equipment.
• Take steps to avoid damage when lifting the product (accident prevention,
material protection).
• Heavy products and components must be carried by two people or by one
person with lifting aids (accident prevention, material protection).
• Wear appropriate protective clothing (e. g. safety shoes).

4.2 Storing the product

Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Avoid direct sunlight.
• Keep the product in the original or delivery packaging until the time of instal-
lation.
• Also observe any additional storage information on the product packaging.

4.3 Returning the product

Proceed as follows to return the product:
1. If the product has already been mounted: Dismount the product. See
g 10. Dismounting.
2. Package the product in its original packaging.
If the original packaging is no longer available: Get in touch with our contact
address for a shipping packaging. See back cover.
3. If the product cannot be returned immediately: Observe the storage condi-
tions. See g 4. Transport and
4. Return the product.
AVENTICS™ AF2 | R412026496–BAL–001–AB | English
storage.

5 Product description

5.1 Brief description

The flow sensor is available in 22 variants. See
ants. For further information, refer to the online catalog.

5.2 Product overview

5.2.1 Overview of product variants

Table 1: AS Ethernet variant
Designation Nominal Process connection
width
AS2-AF2-ETH- DN08 G3/8 internal thread
G038-CON
AS2-AF2-ETH- DN08 G3/8 internal thread
G038
AS3-AF2-ETH- DN15 G1/2 internal thread
G012-CON
AS3-AF2-ETH- DN15 G1/2 internal thread
G012
AS5-AF2-ETH- DN25 G1 internal thread
G100-CON
AS5-AF2-ETH- DN25 G1 internal thread
G100
Table 2: AS IO-Link variant
Designation Nominal Process connection
width
AS2-AF2-FLX- DN08 G3/8 internal thread
G038-CON
AS2-AF2-FLX- DN08 G3/8 internal thread
G038
AS3-AF2-FLX- DN15 G1/2 internal thread
G012-CON
AS3-AF2-FLX- DN15 G1/2 internal thread
G012
AS3-AF2-FLX- DN15 G1/2 internal thread
G012-CON-R-L
AS3-AF2-FLX- DN15 G1/2 internal thread
G012-CON-R-L
AS5-AF2-FLX- DN25 G1 internal thread
G100-CON
AS5-AF2-FLX- DN25 G1 internal thread
G100
Table 3: HF Ethernet variant
Designation Nominal Process connection
width
HF-AF2-ETH- DN40 R1 ½ external thread
R112-CON
HF-AF2-ETH- DN40 1 ½ " NPT external
N112-CON thread
HF-AF2-ETH- DN50 R2 external thread
R200-CON
HF-AF2-ETH- DN50 2" NPT external thread
N200-CON
Table 4: HF IO-Link variant
Designation Nominal Process connection
width
HF-AF2-FLX- DN40 R1 ½ external thread
R112-CON
HF-AF2-FLX- DN40 1 ½ " NPT external
N112-CON thread
HF-AF2-FLX- DN50 R2 external thread
R200-CON
HF-AF2-FLX- DN50 2" NPT external thread
N200-CON
g 5.2.1 Overview of product vari-
Remark
Configurator variant
Variant with W05
Configurator variant
Variant with W05
Configurator variant
Variant with W05
Remark
Configurator variant
Variant with W05
Configurator variant
Variant with W05
R-L configurator variant
R-L configurator variant with stan-
dard filter
Configurator variant
Variant with W05
Remark
R external thread can be com-
bined with R internal thread and G
internal thread
R external thread can be com-
bined with R internal thread and G
internal thread
Remark
R external thread can be com-
bined with R internal thread and G
internal thread
R external thread can be com-
bined with R internal thread and G
internal thread
25