Package, Transport, Storage; Delivery; Transport; Storage - Homa MX F Serie Originalbetriebsanleitung

The sealing between pump and motor is carried out by
two separate mechanical shaft seals (silicon-carbide) in
tandem-arrangement. It is made of bearing cover and
pressure cover. It is filled with medical white oil. Separate
large oil chamber, lubricating and cooling the mechanical
seals, forming an extra safety and inspection element.
3.3.5. Pump housing
The pump housing, depending on the model, is supplied
with different connections. This means that the machine
can be connected with the respective pipe system. The
pump housing is also available rubber-coated inside. Some
pump housings are supplied with a cleaning hole lid to
eliminate blockages. The pump can equipped with a sta-
tionary wear ring which can be found in the intake port.
This wear ring determines the gap between the impeller
and the intake port. If this gap is too big, the performance
of the pump decreases and it can lead to blockages.
Therefore, it is possible to replace the wear ring.
3.3.6. Impeller
The impeller is fastened directly to the motor shaft and
driven by it. The impeller is also available in different ma-
terials (GG, GGG, VA, BZ) or coated with ceramic liquid.
A range of different impeller designs are available:
Enclosed single channel impeller, for liquids containing
M:
impurities and sludge with solid particles or long fibres of up
to 5%
Enclosed multi channel impeller, for liquids containing
K:
impurities and sludge with solid particles of up to 3%
Vortex impeller, for liquids containing a high level of impurities
V:
or fibrous matter and containing gas of up to 7%

4. Package, Transport, Storage

4.1. Delivery

On arrival, the delivered items must be inspected for dam-
age and a check made that all parts are present. If any
parts are damaged or missing, the transport company or
the manufacturer must be informed on the day of delivery.
Any claim made at a later date will be deemed invalid.
Damage to parts must be noted on the delivery or freight
documentation.

4.2. Transport

Only the appropriate and approved fastening devices,
transportation means and lifting equipment may be used.
These must have sufficient load bearing capacity to en-
sure that the product can be transported safety. If chains
are used they must be secured against slipping.
The personnel must be qualified for the tasks and must
follow all applicable national safety regulations during the
work.
The product is delivered by the manufacturer/shipping
agency in suitable packaging. This normally precludes the
possibility of damage occurring during transport and stor-
age. The packaging should be stored in a safe place if the
location used is changed frequently.

4.3. Storage

Newly supplied products are prepared that they can be
stored for 1 year. The product should be cleaned thorough-
ly before interim storage.
The following should be taken into consideration for
storage:
• Place the product on a firm surface and secure it
against falling over. Submersible mixers and aux-
iliary lifting devices should be stored horizontally,
submersible sewage pumps and submersible motor
pumps should be stored horizontally or vertically. It
should be ensured that they cannot bend if stored
horizontally.
ENGLISH | 33