Safety Instructions - Klarstein LUCIFER Bedienungsanleitung

SAFETY INSTRUCTIONS

Read the operating instructions carefully before using the device and keep them for
future use.
• The grill is for outdoor use only.
• Read all safety warnings and instructions carefully before using the device.
• Accessible parts can become very hot. Keep small children away.
• Never move the device while it is switched on.
• After use, turn off the grill's gas supply at the gas bottle.
• Any modifications to the device can be dangerous.
• Some parts of the device become very hot during use of the device. Be particularly
careful when children or elderly people are near the device.
• Do not store or use gasoline or methanol fuels or other flammable vapours and
liquids in the vicinity of this or any other device.
• Never ignite a gas barbecue with petrol or comparable liquids!
• The user must not modify the assembly supplied by the manufacturer.
• Never use an open flame to check for a gas leak.
• Never use the grill if there is an existing gas leak. Turn off the gas cylinder shut-off
valve.
• Never attempt to disconnect the gas cylinder or regulator from the grill while using
the grill.
• Never leave the grill unattended while in use, and take extra care when using the
grill.
• The gas grill must be cleaned after each use. Never block the burner opening. If the
burner opening is blocked, use a round stick with a diameter of 1.6 mm to loosen
the blockage.
• Be careful not to widen the burner opening or nozzle openings when cleaning the
burners or valves.
• Do not use the device in a garage or other closed rooms. This device must be
located at a safe distance from flammable materials. We recommend keeping a
minimum distance of 0.5-1.0 metres from any flammable materials.
• Have the gas grill serviced by a qualified person at least once a year. Do not
attempt to carry out maintenance yourself.
• Any modifications to the device can be dangerous. Do not attempt to make
unauthorised modifications to the main control units such as gas taps, injectors,
valves. Furthermore, accessories sealed by the manufacturer or customer service
must not be removed or modified under any circumstances.
EN
21