Shark SPARTAN GT PRO Benutzerhandbuch Seite 13

7- Next, place the main anti-fog
breath guard into its rightful place by
sliding the plastic parts between the
shell and the wrap-around neck roll.
8 - Refasten the snaps and reposition
the breath guard extension Velcro.
7 7
WARNING!
padding is critical to maintain
the correct fit of the helmet on
your head. If you have any doubt
whatsoever regarding the removal
or replacement of the interior
padding, DO NOT USE YOUR
HELMET. Contact your retailer for
7 7
assistance or advice. NEVER use
your helmet with any part of the
interior padding removed. The
helmet will not protect you in an
accident.
WARNING! The polystyrene
lining and interior padding are
critical to properly fit your helmet
on your head. An improper fit could
cause your helmet to become
dislodged in an accident, leaving
your head unprotected and resulting
in severe head injury or death. If
you are not sure that you properly
8 8 replaced the comfort padding,
DO NOT USE YOUR HELMET.
Contact your retailer for assistance
or advise.
8 8
8 8
The interior
13