BMW 84105A48C11 Bedienungsanleitung Seite 40

At the end of the SIM Reader registration
process, the status LED lights red rather than
blue.
When I press the connect key, the status LED
does not display anything.
When the SIM Reader is being registered on
the vehicle, the SIM Reader is not shown in the
Control Display.
I want to register my SIM Reader on my vehicle.
However, when pressing the connect key
briefly, the status LED lights permanently blue
(Bluetooth connection active) rather than green
(ready for connection). Or, when pressing the
connect key for longer, the status LED lights
permanently blue rather than flashing blue
(Bluetooth paring mode).
The SIM Reader does not automatically connect
to my vehicle although it has previously been
registered successfully.
38
The SIM Reader has detected a problem and the
registration process has been cancelled. Please
repeat the registration process at a later time. If
the problem occurs repeatedly, please contact
your BMW dealer.
Please check that a SIM card has been inserted
in the SIM Reader. Unless a SIM card has been
inserted, the SIM Reader will be in Off mode to
save the battery.
Please ensure that the SIM Reader is in the
front of the passenger cabin and repeat the
registration process.
Please ensure that there is no other vehicle in
the vicinity on which the SIM Reader has already
been registered. If necessary, lock the other
vehicle.
1. Please ensure that the SIM Reader is in the
vehicle, ideally in the front of the passenger
cabin.
2. Please check that the battery in the SIM
Reader is not discharged. Please replace
the battery if status LED lights red when you
press the connect key.
3. Please check that your BMW ID is activated
and a different BMW ID has not been
activated (for example by using a different
vehicle key).