BMW 84105A48C11 Bedienungsanleitung Seite 39

FAQs
The SIM Reader cannot be registered on my
vehicle.
The status LED of the SIM Reader lights red
before the connect key has been pressed.
1. The SIM Reader can only be used if your
vehicle this fitted with the Personal eSIM
option (SA 6PA). In addition, the use of the
SIM Reader may not be possible due to
the version of the control units used in the
vehicle and the software used. Please ask
your BMW dealer about the compatibility of
your vehicle with the BMW SIM Reader.
2. Please ensure that your vehicle has mobile
phone reception.
3. If the status LED lights red during the
registration process, please repeat the
registration process at a later time. If the
problem occurs repeatedly, please contact
your BMW dealer.
4. Please ensure that you have completed the
initial steps to set up the Personal eSIM:
- The BMW ID has been added to the
vehicle, a driver identification has been
defined (using a PIN or the allocation
of a vehicle key or a digital key) and
synchronisation has been activated.
- A mobile phone has been linked to the
Personal eSIM to enable the telephone
function.
5. Please check that the battery in the SIM
Reader is not discharged. Please replace the
battery if the status LED lights red when you
press the connect key.
6. Please ensure that the SIM Reader is in the
front of the passenger cabin.
An incorrect battery has been inserted. Please
only use the approved battery type (ER14250,
3.6 V).
37