BMW 84105A48C11 Bedienungsanleitung Seite 32

Registering the BMW SIM
Reader on the vehicle
The BMW SIM Reader must be registered once
on the vehicle.
Conditions for registration are:
vehicle is equipped with Personal eSIM
(SA 6PA)
standby state of the vehicle is switched on
vehicle is stationary
active ConnectedDrive contract
BMW ID is entered in the vehicle, driver
identification is defined and synchronisation
is activated
mobile phone has been linked to the eSIM
for the telephone function
battery and SIM card are inserted
BMW SIM Reader is placed in the driver or
front passenger area
Steps in vehicle for registration are:
1. Select the BMW ID
2. "MENU"
3. "All apps"
4. "Mobile devices"
5. "Personal eSIM"
6. "Set up with SIM card"
7. Press and hold the connect button on the
SIM Reader for 6 seconds.
The BMW SIM Reader status LED flashes
blue.
The BMW SIM Reader is shown on the
control display.
8. Select the BMW SIM Reader.
If more than one SIM Reader is shown, compare
the names of the SIM Readers to the last five
digits of the serial number of your SIM reader,
which is printed on the outside of the battery
cover.
30
After successful registration on the vehicle, the
status LED of the BMW SIM Reader lights up
blue.
The signal quality of the mobile phone
connection and the battery charge state are
shown in the status field on the control display.