Specifications; Additional Safety Rules For Tool - Makita BFT120 Betriebsanleitung

ENGLISH
1-1. Battery cartridge
1-2. Button
2-1. Red part
2-2. Button
2-3. Battery cartridge
3-1. Switch trigger

SPECIFICATIONS

No load speed (min
Fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
Model; BFT120,BFT120F,BFT121F
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN50260, EN55014
Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2005
000087
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Explanation of general view
4-1. Light
5-1. Reversing switch lever
6-1. LED indicator
7-1. Graduations
7-2. Adjusting grip
9-1. Bit
Model
-1
)
Dimensions
Net weight
Rated voltage
2
.
in accordance with Council
Director
BFT120/BFT120F
5 - 12 N•m
174 mm x 65 mm x 256 mm
(with battery cartridge BH9020A)
174 mm x 65 mm x 279 mm
(with battery cartridge BH9033/BH9033A)
1.3 kg
(with battery cartridge BH9020A)
1.4 kg
(with battery cartridge BH9033/BH9033A)
D.C. 9.6 V
ENE033-1
Makita Corporation Anjo Aichi Japan
ADDITIONAL SAFETY RULES
ENG001-1
FOR TOOL
1. Be aware that this tool is always in an
operating condition, because it does not have
to be plugged into an electrical outlet.
2. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring. Contact with a "live"
wire will also make exposed metal parts of the tool
ENH002-4
"live" and shock the operator.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY
INSTRUCTIONS FOR CHARGER
& BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS- This manual
contains important safety and operating
instructions for battery charger.
2. Before
3
9-2. Sleeve
11-1. Limit mark
12-1. Brush holder cap
12-2. Screwdriver
320
174 mm x 71 mm x 265 mm
(with battery cartridge BH1220)
174 mm x 71 mm x 288 mm
(with battery cartridge BH1233)
(with battery cartridge BH1220)
(with battery cartridge BH1233)
using battery
BFT121F
340
5 - 12 N•m
1.5 kg
1.7 kg
D.C. 12V
ENB026-1
ENC002-3
charger, read all