DEFA SmartCharge 6A Technische Anleitung Seite 8

8. After charging, power-off the charger
and disconnect from the mains' power
supply. The minus and plus terminals
can then be disconnected.
Charging phase details
Provide chargers for a variance of vehicles and
equipment such as motorbikes, snowmobiles,
lawnmowers and boats etc.
Battery Type
Lead acid battery (open and closed types),
AGM, EFB, GEL and lithium batteries with inte-
grated Battery management system (BMS).
Pre Analysis
The charger checks if the battery is correctly
connected. The battery's charge level (V) and
total capacity (Ah) is measured to determine the
correct settings for charging.
Battery
voltage
>12.65V
12.55V–12.65V
12.45V–12.55V
12.35V–12.45V
2.0V–12.35V
Charging
The charger starts charging the battery with
constant current up to 14.4V (at 25°C). The
charge voltage is then held constant at 14.4V
8 English
Battery
status
95–100%
80%
60%
40%
0-20%
LED
indication
All segments on
4 segments on
3 segments on
2 segments on
1 segment on