DEFA SmartCharge 6A Technische Anleitung Seite 10

Additional charger functionality
Temperature based voltage compensation
If the lead/acid charge cycle is selected the
charger automatically adjusts the charging voltage
to the correct level according to the ambient
temperature. The default ambient temperature
is 25°C. Voltage is reduced for higher ambient
temperatures and increased for lower ambient
temperatures. The correct amount is ±0.03V/°C.
Max temperature compensate charging voltage
is 15.3 V.
LI BUTTON
Pushing this button will activate the charging curve
for Li-Ion batteries. The top charge voltage is 14,4V
and float charge voltage is 13,5V. Temperature
compensation is deactivated in this mode. In
this mode the charger will output power even if a
battery is not connected.
Power Supply mode
Keep pressing the button until the LED shines one
by one in a regular buttom to the top cycle, the
charger will start power supply mode. In this mode,
the charger supply 13.6V.
If the output short circuit or connect with incorrect
polarity in this mode, the charger will go into error
mode. You should press the power button to turn
off the charger, then restart the charger (go to
charger or power supply mode).
Automatic restart after power interruption
10 English