10. Troubleshooting
Problem
Luminaire is switched
on but shows no
function
Lamps do not light
Appears in the
display
11. Technical data
Instarter Spectar Bi-Color LED Ring 3.5 Kit
Article number
Type
Material
Lamps
Max. Power
Possible causes
Mains cable is not
plugged in or not
plugged in correctly
Batteries are not
inserted
Batteries are empty
Luminaire is
switched off
Luminaire is defective
Luminaire is over-
heated
23126
Ring light, ⌀ 48 cm
ABS plastic
LED, 480 pieces
60 W
Remedy
Connect power supply
correctly
Insert batteries
Charge batteries
Switch on luminaire
Contact our service
department!
Repairs may only be
carried out by a qualified
electrician.
1.
Switch off the
luminaire.
2.
Wait until the
luminaire has cooled
down and then switch
it on again.
EN
41