Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.
To remove the smartphone, hold it with one hand and loosen the holder
fixing screw (15c) with the other hand.
7.8 Adjust the brightness (
1.
Switch on the luminaire as described in the chapter 6.
2.
Turn the rotary knob (5) to the right or left until the desired brightness is
reached.
→ The selected % value is shown in the middle line of the display (6).
7.9 Set colour temperature (
1.
Switch on the luminaire as described in the chapter 6.
2.
Press the function knob (7) until the colour temperature
the bottom line of the display and release the knob.
3.
Turn the function knob (7) to the right or left until the colour temperature
corresponds to your idea.
→ The corresponding colour temperature in K is shown in the bottom
line of the display (27).
7.10 Setting the light effects ( 01-04) on the lamp
1.
Switch on the luminaire as described in the chapter 6.
2.
Press the function knob (7) until the light effect symbol
top line of the display and release the knob.
3.
Turn the function knob (7) to the right or left until the desired
light effect (23) is achieved.
→ The luminaire has the effects Thunder, Lightning, Screen and
Candlelight.
7.11 End luminaire setting or light effect
To end the current luminaire setting or the selected lighting effect,
briefly press the function rotary knob (7).
1-100%) on the luminaire.
3200-7500K) on the luminaire
is shown in
is shown in the
39
EN
Werbung
Inhaltsverzeichnis
