29.2 - OPTIONAL KIT FOR INTER-PLANT SPACINGS
To obtain the indicated distances between plants, fit the gears as shown in the table
(fig. 26).
A = gear to be fitted to the hexagonal axle
B = gear to be fitted to the drive wheel
C = gear to be fitted to the transplant unit
Do this work as described in point 26.1 and change the gear (fig. 27.D) by means
of the appropriate screws (fig. 27.E)
29.3 - EXTRA SEAT
Meets the possible need for two operators for each transplanting unit; only for row
inter-spacing of more than 100 cm.
Fit as shown in fig. 28.
52
FIG. 26
E
TRIUM
FIG. 28
D
FIG. 27