EKOM DK50 2V/M Benutzerhandbuch Seite 42

Symbol for chamber pre-filling – equalisation of pressure in chambers.
max max
0
19.2. Initial settings for the user interface
The option to select language, time and date appears when the program is first launched. The
service technician selects the given language, time and date during installation based on the
geographic location of the dryer installation. The program saves and remembers this setting. The
option does not appear when the program is restarted. Confirming this option will also start the
service hours countdown.
LANGUAGE SETUP
ADSORPTION DRYER
IS ON
19.3. Setting the date and time during commissioning
It is recommended to set the date and time during commissioning. These settings are changed in
the service menu in the SETUP section. Access to the service menu is protected by a code (1992).
In SETUP you have to tap down arrow to set date and time. In the same way, it is possible to
reset the user interface language via LANGUAGE SETUP.
19.4. Setting the drying mode during commissioning
It is recommended to set the air-drying mode during commissioning. These settings are changed in
NP-DK50 2V-A-5_12-2022-AD
LANGUAGE SETUP
CZ SK
GER UK
CONFIRM THE
RUS HUN
FR
Indication the device is operating
Indication of an alarm state
(on until the alarm state no longer
exists)
RUN
LANGUAGE:
CZECH

E N T E R
42
AD DRYER
12/2022