Vaisala Indigo80 Kurzanleitung Seite 11

3. Place the indicator on a clean, flat surface, with the display facing down.
4. Open the screws (2 pcs) on the back cover and lift the cover to remove it.
5. Detach the battery connector from the component board by pulling it out gently.
Do not touch the connector with conducting material, for example with a metallic
screwdriver.
1
1 Battery connector, connected to battery with 3 wires
2 Lithium-ion battery
6. Lift the top end of the battery and remove the battery from the cradle.
7. Reattach the back cover and fasten it tightly with the screws.
2
11