Safety Instructions For Power Tools - Cross Tools CSC 230-1200 PRO Original-Gebrauchsanweisung

Noise emission and vibrations
Values measured in accordance with EN 62841-1:2014 and EN 12418:
Sound pressure level:
•
L 85 dB(A), uncertainty K
pA
Sound power level:
•
L 98 dB(A), uncertainty K
WA
Total vibrations (vector sum of three directions) determined in accordance with
EN 62841-1:2014:
•
Vibration emission value a
The vibration level determined in accordance with EN 62841-1:2014 is suitable for a comparison of power tools. It can
also be applied for a preliminary assessment of vibratory stresses.
The vibration level represents the main applications of the power tool. If the tool is used for different applications, with
different insert bits or with inadequate maintenance, the vibration level might differ. In this case, vibratory stresses during
the whole working period can increase significantly.
For an accurate assessment of vibratory stresses, those periods must also be taken into account during which the tool is
turned off or is running without being used. In this case, vibratory stresses during the whole working period can decrease
significantly.
Operators should be protected against vibrations by additional safety measures like: regular maintenance of the tools,
keeping their hands warm and appropriate organization of operating sequences.

4. Safety instructions for power tools

Please read these instructions carefully and get acquainted with the operating controls and the proper
operation of the tool. We accept no responsibility for damages occurring due to non-observance of instructions
and regulations in this manual. Damages occurring due to non-observance of instructions and regulations in
this manual are not covered by guarantees.
Keep this manual in a safe place. If you pass on the tool, please also provide this manual.
The tool must not be used by children or people not acquainted with this manual. Children should be supervised to
ensure that they do not play with the tool. In some countries, local regulations might limit the age of possible users of the
tool. These regulations must be adhered to.
Unless supervised by persons responsible for their safety or introducing them to the use of the tool, people with limited
physical, sensory or mental capacities must not use the tool.
Caution! Any modification which could lead to a change in the original characteristics of the machine, such as
rotational speed or maximum diameter of the cutting-off wheel may be carried out only by the manufacturer of
the machine.
Keep all safety instructions and operation instructions for future reference.
The term "power tool" used in the safety instructions refers to mains-operated power tools (with power cord) as well as
battery-powered tools (without power cord).
Please take notice of the meaning of the following pictographs.
Be careful while handling
power tools
Pull the mains plug before
any kind of maintenance and
repair work
WARNING! When using electric tools basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury including the following.
14
=3 dB
pA
=3 dB
WA
= 2.5 m/s² - uncertainty K=1.5 m/s²
h
Caution voltage
Wear ear and eye
protection.
Translation of original operating instructions
Attention!
Rotating parts.
Wear breath protection.
3
Make sure to read the
manual before set-up.
Wear safety gloves!