Technical Data - ChiQ MG80-14586BW Benutzerhandbuch

Electric connection
Before plugging the washer into the mains
socket, make sure that:
- The socket is earthed and in compliance with
the applicable law.
- The socket is able to sustain the appliance's
maximum power load indicated on the
Technical Date Plate fixed on the machine.
- The supply voltage is included within the
values indicated on the Technical Date Plate
fixed on the washer.
- When heating, the maximum current of the
washer is 10A, so please make sure that the
power supply system (voltage, current and
the cable) is applicable to the load of the
applied appliance.
- The socket is compatible with the washer's
plug. If this is not the case, replace the socket
or the plug by a qualified electrician.
WARNING: THIS APPLIANCE MUST BE
EARTHED. THE FOLLOWING OPERATIONS
SHOULD BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN.
Replace the supply cable:
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its
service agent or similarly qualified persons in
order to avoid a hazard – risk of electric shock.
Disposing of the plug:

Technical Data

Model
Rated washing capacity (kg)
Rated voltage
Rated frequency
Rated power (W)
Washing noise level (dB)
Spinning noise level (dB)
Spin speed (rpm)
Water pressure (MPa)
Degree of waterproof
Net weight (kg)
Outer dimension (WxDxH mm)
Ensure that before disposing of the plug itself,
you make the pins unusable so that it cannot be
accidentally inserted into a socket.
Disposing of the appliance:
When disposing of the washer please remove the
plug by cutting the mains cable as close as
possible to the plug body and dispose of the plug
as described above.
- The washer is not intended to be operated by
means of an external switching device, Such
as a timer, or separate remote-controlled
system.
- When the washer is installed, the mains
socket must be within easy reach.
- Do not use extension cables, multiple sockets
or adapters.
- To remove the plug from the socket, grasp
the plug firmly and pull it out. Do not pull at
the cable.
- The electrical components must not be
accessible to the user after installation.
- Do not connect the machine to electrical
outlets while your hands are wet or damp.
- Do not operate this appliance when you are
wet or barefoot.
- Do not operate this appliance if it has a
damaged power cable or plug, if it is not
working properly, or if it has been damaged
or dropped.
- WARNING! The company denies all liability if
and when these norms are not respected.
MG80-14586BW
8.0
60
600 X 520 X 847
8
MG100-14586BX
10.0
220～240V
50Hz
2000
62
76
1400
0.03 ～ 1.0
IPX4
65
600 X 577 X 847