What's Included; Accessories - ChiQ MG80-14586BW Benutzerhandbuch

WHAT'S INCLUDED

Water inlet
Door
Drain hose
Cabinet

ACCESSORIES

User manual
×1
REMOVING THE TRANSPARENT BOLTS
CAUTION: DAMAGE TO THE APPLIANCE OR INJURY POSSIBLE
The washer is secured for transport with transport bolts. Transport bolts that are not removed can
•
damage the drum during operation of the washer, the washer will vibrate, and it will be much noisier
during spin cycles if the transport bolts are not removed before use. Be sure to remove all 4 transport
bolts completely before first use. Keep the transport bolts. If a pedestal was purchased with the washer,
it must be installed first, prior to removing the transport bolts. Please consult the pedestal installation
instructions.
In order to prevent transport damage during later transport, be sure to re-install the bolts before
•
transport.
1. Undo the four transport bolts A by the wrench (supplied) and remove them.
2. Remove the four spacers B. They will fall to the floor when you tip the machine.
3. Insert the four cover caps C which will find in the plastic bag containing the accessories.
Keep all the parts in safe place: you will need them again if the washer needs to be moved to another
location.
NOTES:
Transport the washer for the prevention of breakage as below:
•
The transport bolts are reinstalled.
•
The power cord is secured to the back of the washer.
•
Water inlet hose
×1
5
Power cord and plug
Detergent drawer
Control panel
Drum
Drain filter cover
Adjustable feet
Wrench
×1
Cover caps
×4