ChiQ MG80-14586BW Benutzerhandbuch Seite 10

1. DISPLAY.
The display is useful when programming the machine and provides a great deal of
•
information.
1. TEMPERATURE indicator.
When a program is selected, the default temperature value of this program will appear on
•
the display, with the corresponding temperature indicator light illuminated.
You can change the temperature value by pressing the temperature button. When a
•
temperature value is selected, the corresponding temperature value indicator light
illuminated on the display. If all temperature value indicator light is off, it indicated the
washer using only cold water without utilized the washer's heater in this program.
2. SPINNING SPEED indicator.
When a program is selected, the default spinning speed value of this program will appear
•
on the display, with the corresponding spinning speed indicator light illuminated.
You can change the spinning speed value by pressing the speed button. When a spinning
•
speed value is selected, the corresponding spinning speed value indicator light illuminated
on the display. If all spinning speed indicator light are off, it indicates the washer does not
spin after the final drain process in this program.
3. DOOR LOCK indicator.
The lit symbol indicates that the door is locked. To prevent any damage, wait until the
•
symbol turns off before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE button, if the DOOR
•
LOCK symbol is switched off the door may be opened.
4. CHILD LOCK indicator.
The lit symbol indicates the CHILD LOCK function is activated; the control panel is locked
•
(apart from the OFF position on the control panel).
5. DELAY END indicator.
The lit symbol indicates the DELAY END function is activated. The countdown to the end of
•
the selected wash cycle will appear on the digital display.
6. ONE TOUCH indicator.
The lit symbol indicates the One Touch wash program is selected. There are three ways to
•
set the One Touch wash program.
7. RINSE COUNT indicator.
When the symbol lit, you can select the rinse count, the selected rinse count will appear on
•
the digital display.
8. DIGITAL DISPLAY.
Wash cycle
remaining time Delay end time DIY time Rinse count
10
Fault code