Warranty Conditions - ChiQ MG80-14586BW Benutzerhandbuch

In case of the following faults, the fault state will be detected by the microcomputer system, with the buzzer
sounds issued and the following fault codes display:
Fault codes Fault type
E02 No inlet water
E03 Abnormal water
drainage
U4 Door lock malfunction
H The temperature in
the drum is high
EXX Other faults
Note: Be sure to check the fault cause and eliminate the fault before pressing the START/PAUSE button
again. If the fault code is removed, the washer will continue to run, and if the fault code still exists, please
unplug the power cord, and call our customer service centre for help as soon as possible.
Remember, you will be charged for a service call for problems caused by incorrect installation.
•
Not emptying contents from pockets may cause pump or drain hose blockages or may damage
•
the machine.
Do not wash items which do not have a wash label, or wash items that are not intended as
•
machine washable.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other
services during the warranty period, contact the product seller directly, you must provide the original proof
of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed
claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or failing to follow
•
the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or
•
mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means,
etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
•
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields,
•
fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning),
faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as
used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or
•
extend the functions of the product compared to the purchased design or use of non-original
components.
Possible cause / solutions
Check whether the faucet is turned on? Whether the water
supply is cut off? Whether the water inlet hose and the filter of
the water inlet valve are blocked? and whether the water inlet
hose of the washing machine is frozen? In such case, please
contact the service centre for repair.
Clean the pump filter. Check whether the drain hose is bent,
twisted or blocked? If the fault still exists, please contact the
service centre for repair.
Close the door again, and then press the START/PAUSE button
to restart the program. If the fault still exists, please contact the
service centre for repair.
Press the START/PAUSE button to suspend the washing
machine operation and wait for several minutes. When the
temperature in the drum drops to a safe range and the fault
code on the display is removed, press the START/PAUSE button
to continue the rest of the program.
Turn the washing cycle selector knob to the "OFF" position to
turn off the power supply, unplug the power cord, and contact
the service centre for repair as soon as possible.
21