Using The Appliance - Philips HF8440 Bedienungsanleitung

Note: The massagers may produce a smell the first few
times you charge them. This is normal.
, When the massagers are fully charged, the
charging light goes out.

using the appliance

Note: The massager shown in the figures is the female
massager. The male massager has the same buttons
and functionalities.
Thoroughly clean the massagers before first use,
after every use and when you use them on another
body area, to reduce the risk of infection (see
chapter 'Cleaning').
1 Press any button to switch on the massager.
Note: If the massager has not been used for more
than 7 days, you can only switch it on by pressing the
+ button.
, The light ring goes on.
, The massager starts operating in the default
mode (mode 1) and at the default vibration
speed.
Tip: You can adjust the speed and select a mode
once you have familiarised yourself with the options
available.
2 Press the mode selection button to adjust the
vibration to your own preference.
The massager has 4 vibration modes:
1 Continous – continuous vibration
2 Wave – a pattern of pulses that rises and falls in
intensity
3 Heart beat – a gentle, relaxing pulse
4 Thrill – an exciting and intense pulse
EnglisH
11