Inhaltsverzeichnis
Werbung
ANNEX - 1
EN
ASSEMBLY INSTRUCTIONS FOR ACCESSORIES
IT EN
ASSEMBLY OF REAR SLIDING DOORS
Montaggio mensola intermedia in vetro
Instuctions of intermediary glass shelf
Fasten the "E1" profile (red) with silicone (indicated with orange) on the
overhead light (see figure 5).
Please note that the "E1" profile is smaller than the "E" profile.
Wait until the silicone works and then, insert the sliding doors.
B
A
A
N.2 Viti fissaggio posteriore mensola tubolare (sotto piano lavoro)
N.2 Screws to fix the back of tubolar support (under working table)
B
N.2 Supporti in plastica da posizionare sopra la mensola tubolare
N.2 Plastic support to be positioning up to the tubolar support
C
Mensola tubolare sostegno vetro
Tubolar support to support the intermediary glass shelf
D
N.2 Viti fissaggio mensola tubolare (parte anteriore del mobile)
N.2 Screws to fix the tubolar support inside the front part of the cabinet.
Istruzioni per montaggio mensola intermedia in vetro
1
Assembly instructions for plexiglas sliding doors
Istruction how to fix the intermediary glass shelf
C
D
C
A
Annexes | Use and maintenance manual | EN
B
Overhead light
Worktop
Evaporator
D
Display area
2
129
Werbung
Inhaltsverzeichnis
