Automatic Switch-Off; Using The Cooking Zones; The Heat Setting - Electrolux GK29TCIO Benutzerinformation

5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9

5.3 Using the cooking zones

Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.

5.4 The heat setting

Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour
5.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ /
indicator is on, there is a risk
of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
The indicators appear when a cooking
zone is hot. They show the level of the
residual heat for the cooking zones you
are currently using:
- continue cooking,
- keep warm,
- residual heat.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
5.6 Bridge
The function operates when
the pot covers the centres of
the two zones. For more
information on the correct
placement of cookware refer
to "Using the cooking
zones".
This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function: touch
set or change the heat setting touch one
of the control sensors.
To deactivate the function: touch
The cooking zones operate
independently.
ENGLISH 11
As long as the
. To
.