Electrolux GK29TCIO Benutzerinformation Seite 8

8 www.electrolux.com
Integrated installation
1. Clean the rabbets in the worktop.
2. Cut the supplied 3x10 mm seal stripe
into four stripes. The stripes must
have the same length as the rabbets.
3. Cut the ends of the stripes at an
angle of 45°. They should fit in the
corners of the rabbets accurately.
4. Attach the stripes to the rabbets. Do
not stretch the stripes. Do not bond
the ends of the stripes one over the
other.
After you assemble the hob, seal the
remaining gap between the glass
ceramic and the worktop with silicone.
Make sure the silicone does not get
under the glass ceramic.
3.5 Assembly
If you install the hob under a hood,
please see the installation instructions of
the hood for the minimum distance
between the appliances.
min.
500mm
If the appliance is installed above a
drawer, the hob ventilation can warm up
the items stored in the drawer during the
cooking process.
ON-TOP INSTALLATION
INTEGRATED INSTALLATION
min.
50mm
290
60 30
490
270
min. 50
min.
12
290
60 30
490
270
min. 50
min.
12
510
51
min. 1500
min.
28
510
56
min.
28
min.
28 mm