TESTBOY TV 950 Bedienungsanleitung Seite 10

Function
Function
Thank you for choosing the Testboy
can be used to test the function of EVSE charging posts. The LEDs indicate which and how
many phases are present at the charging socket. In addition, the plug interlock can be tested, if
this is given.
Legend for the instrument
1. EVSE-Plug
2. Phase Indicating LEDs L1, L2, L3
3. Unlock Button
4. Loading Button
Function
The Testboy TV 950 is an EVSE charging pole tester that checks the most important charging
pole functions in no time at all to ensure safe charging. The device simulates a vehicle ready
for charging, checks the plug interlock and shows the applied phases via LED display.
Preparation
To switch on the device, hold the unlock button and connect it to your EVSE charging pole.
Release the unlock button as soon as the TV 950 is fully plugged in. It is possible that the
charging pole will unlock automatically, otherwise it is necessary to unlock the charging pole
via user interface. To test the charging pole, it must be unlocked. Before the test procedure,
make sure that any required documents, such as an activation code, are available.
Checking the plug locking
When the charging pole has been unlocked and is ready for charging, the TV 950 can be plug-
ged into the EVSE charging pole. As soon as the tester has been plugged in, the automatic lo-
cking of the charging pole should arrest the TV 950 (CP state B).
Phase display
If the EVSE charging station has been enabled and the TV 950 is plugged into the charging
station, the charge key can be pressed and held (CP state C). When the charge button is pres-
sed, the device indicates which phases are present (e.g. L1, L2, L3). When the load key is re-
leased, the simulated load process is completed.
10
TV 950, an EVSE tester with LED display. This device
®
®
Testboy TV 950