Using The Phone; Answer A Call; Making A Call; Last Number Redial - Geemarc ClearSound CL60 Handbuch

If you are using this telephone with a hearing aid, set your

1 -Answer a call

- When an incoming call is received the phone will ring and
flash, to answer the call lift the handset and speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line. See also section on Auto/Manual
switch

2 - Making a call

- Lift the handset.
- Await the dial tone and dial the required number.
- On completion of the call, carefully replace the handset in the
cradle.
See also section on Auto Dial On/Off switch

3 - Last number redial

- Lift the handset.
- Await the dial tone and press
- The previously dialled number will be automatically redialled
(not in use for memory numbers).
Note: If Auto Dial On/Off switch is set to ON position (
Last Number Redial Button is not pressed within 4 secs of lifting
the handset, the number stored in SOS memory will
automatically dial out.
4 - Recall (R), * & # buttons
These are used with the new services provided on digital
exchanges. For details please contact your network operator.

USING THE PHONE

hearing aid to the T setting.
button.
9
), if the