Handle Adjustment - Kinderkraft PRIME2 Bedienungsanleitung

I PUSHCHAIR FRAME ELEMENTS (PIC. 1)
1. Handle
2. Handle adjustment button
3. a) Release button
b) Folding lever
4. Frame port
a) Car seat adapters
5. Blocking element after folding the frame
6. Brake
7. Rear wheels
8. Front-wheel releasing button
9. Front wheels
10. Swivel wheels lock
11. Rear wheel release button
III CARRYCOT ELEMENTS (PIC. 3)
21. Carrycot carry handle
22. Carrycot hood
23. Carrycot folding/unfolding button
24. Lever releasing the carrycot from the frame
25. Carrycot connector to the pushchair frame
26. Backrest adjustment lever
27. Mattress
IV. UNFOLDING THE PUSHCHAIR FRAME
Release the locking element( PIC.4). Hold the frame and lift the handle (PIC.5) until hearing the characteristic locking
sound (PIC. 6).
V. ASSEMBLY AND DISASSEMBLY OF FRONT WHEELS
Insert wheels into the slots on the front of the frame until hearing a locking sound (PIC. 7). To remove the wheels, press
the release button (PIC. 8). The wheels can be locked to ride straight by pressing the lock button ( PIC.9 I). PIC. 9.II shows
the deactivation of the lock.
VI. ASSEMBLY AND DISASSEMBLY OF REAR WHEELS
Slide in the wheel's pin into appropriate frame slots till they click (PIC. 10). To release the wheel, press the button (PIC.11.
I) and remove the wheel ( PIC. 11.II).
NOTE! Before using the buggy make sure that all the wheels are properly installed.
VII. BRAKE
Activate the brake ( PIC. 12.I). Lift the brake to deactivate the lock (PIC.12.II).
VIII. ASSEMBLY AND DISASSEMBLY OF THE SEAT
Clip the seat connector (16) into the frame port (4) until hearing a characteristic click ( PIC. 13.I). The seat can be fitted
front or rear-facing to the direction of travel ( PIC.13). Press the lever realising the seat (15) of the frame (4) on both sides
and pull upwards (PIC.13.II) to disassemble the seat.
IX. ASSEMBLY AND DISASSEMBLY OF THE HOOD
Insert the hood into the guides ( PIC.14 I). Secure with the hoop&loop fasteners on the sides (PIC.14.II) and zip u pat the
back of the seat (PIC.14.III). To disassemble, follow the steps in reverse order ( PIC.14.IV, 14.V,14.VI).
CAUTION! Assemble the hood before using the pushchair.
X. ASSEMBLY AND DISASSEMBLY OF THE BUMPER BAR
Insert the bar into the appropriate frame slots ( PIC.15.I). To remove the bar, press the buttons on both sides of the frame
and slide out the bar ( PIC.15.II).
XI. SAFETY HARNESS ADJUSTMENT
Adjust the height of belts each time ( PIC.16.I & 16.II). Press the button to unbuckle the harness ( PIC.17). To fasten,
connect the side belts together (PIC. 18.I) and then clip them into the buckle ( PIC. 18.II).
XII. BACKREST ADJUSTMENT
Adjust the backrest by the lever ( PIC.19.I & 19.II) in one of 4 positions.
XIII. HANDLE ADJUSTMENT
Press the handle adjustment button (2 ) and set it in a convenient position ( PIC.20).
XIV. BAG ASSEMBLY
Hang the bag (31) on the handle using the hangers (33) ( PIC.21). The set also includes a changing mat (32).
XV. FOOTREST ADJUSTMENT
II STROLLER SEAT ELEMENTS (PIC. 2)
12. Backrest adjustment lever
13. Button to detach the stroller shade
14. Button to detach the bar
15. Lever releasing the seat from the frame
16. Seat connector to the pushchair frame
17. Footrest adjustment button
18. Bar
19. Leg warmer
20. Universal rain cover
28. Leg warmer
29. Carrycot lining
30. Universal rain cover
31. Bag
32. Changing mat
33. Bag hangers
20