Kinderkraft PRIME2 Bedienungsanleitung Seite 31

To change the position upwards, lift up the footrest ( PIC.22.I). To adjust it downwards, press the side buttons and lower
it (PIC.22.II & 22.III).
XVI. SHOCK ABSORPTION ADJUSTMENT
Turn the knobs according to the picture ( PIC.23.I) during rides on uneven surfaces. Increase the stability on flat surfaces
by turning the knobs upwards until they lock ( PIC.23.II).
XVII. LEG WARMER AND RAIN COVER ASSEMBLY
Secure the cover with snaps on both sides of the hood (PIC. 24)
Put the rain cover on the seat (20) or carrycot(30).
XVIII. DISASSEMBLY OF THE STROLLER
Set the seat front-facing ( PIC.25.I). Leave the backrest in the lowest position. Press the brake (PIC. 25.II). Fold the shade.
To fold, press the unlocking button (3a) and pull both folding levers (3b) towards yourself ( PIC. 25.III). After the complete
folding of the stroller, the blocking element should lock by itself (PIC.25.IV). Lower the footrest to minimise the
dimensions ( PIC. 26.V).
CAUTION! Do not fold the pushchair frame once the car seat, carrycot or seat are fitted rear-facing.
XIX. PUSHCHAIR CARRYCOT
Set carrycot hood ( PIC. 26.I). To fold the hood, press the buttons on both sides of the frame (PIC.26.II).
The carrycot has an attached lining ( 27), which can be detached by unzipping the zipper around it (PIC.27.I), and the
mattress (29), which should be placed inside the carrycot (PIC.27.II).
Attach the leg warmer with zipping and secure it on the sides by button and loop (PIC.28.I) and pin the additional button
(PIC.28.II) if you want to use the additional hood panel.
NOTE! The pram body can only be mounted facing backwards the child faces the person pushing the buggy).
XX. CARRYCOT BACKREST ADJUSTMENT
Push the lever ( PIC.30) located under the carrycot and lock it in a convenient position.
XXI. ASSEMBLY AND DISASSEMBLY OF THE CARRYCOT ON THE FRAME
Clip in the carrycot connector (25) into the frame port (4) ( PIC.30.I ) until characteristic click. Release the lever to
disassemble the carrycot and pul lit upwards (PIC. 30.II).
XXII. CAR SEAT ASSEMBLY ON THE FRAME
The attached adapters are compatible with car seats: Kinderkraft®, Kiddy®, Maxi Cosi®, Cybex®, BeSafe®, Nuna® and they
fit, among others, for models: Kinderkraft Mink, Kiddy Evoluna i-Size 2, Kiddy Evolution Pro 2, Cybex Aton 5, Cybex Aton
M, Cybex Aton M i-Size, Cybex Aton B2, Cybex Aton S2 i-Size, Cybex Cloud Z i-Size, Maxi Cosi Cabriofix i-Size, Maxi Cosi
Pebble Pro, Maxi Cosi 360, Maxi Cosi Rock, Maxi Cosi Tinca, Maxi Cosi Citi, BeSafe izi Go Modular x1, Britax Romer Baby-
Safe 3, Avionaut Pixel, Nuna Pipa next i-Size, Nuna Pipa lite, Nuna Pipa lite lx, Kinderkraft I-Lite. Place the adapters on the
frame ( PIC. 31.I) and insert the car seat on mounted adapters ( PIC. 31.II). Removing the adapters is shown on PIC. 32.
NOTE! The car seat must always be fitted in such a way that the child should face the carer.
XXIII. CARE AND MAINTENANCE The buyer is responsible for proper installation of all functional elements as well as for
carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition.
The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child's
safety and prevent shortening of the product life have been presented below:
• Check the strength and safety of all rivets and connections.
• Check all wheel locking equipment and tyres. If necessary, replace or repair.
• Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any
time.
Please, stop using the buggy if there are doubts as to its proper use or a suspicion of any danger.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt, which
makes buggy movement difficult.
XXIV. CLEANING If the elements of the buggy chassis have been exposed to saltwater, rinse with tap water as soon as
possible. Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mould
growth.
Mummy bag: hand wash; do not: bleach, tumble dry, iron, dry-clean.
Basket, carrycot canopy, seat canopy, seat sheathing, mattress: do not wash. The product can be cleaned gently with a
moist cloth and mild detergent; do not: bleach, tumble dry, iron or dry-clean.
mat, leg cover, mattress cover, carrycot lining: maximum wash temp. 30°C; do not: bleach, tumble dry, iron, dry-clean.
21