Herunterladen Inhalt Inhalt Diese Seite drucken

Disassembly And Storage - Bestway HYDRIUM 561CU Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
• Pool damage resulting from misuse of chemicals and mismanagement of pool water is not covered by the warranty.
• Over usage of chemical will discolor the printing and all points of the pool material; in worse case it will damage the
structure of the pool liner.
• Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical
vapors and the incorrect labeling and storage of chemical containers.
• Please consult your local pool or chemical supply retailer for more information about chemical maintenance. Pay close
attention to the chemical manufacturer's instructions.
• The pump is used to circulate the water and to filter small particles. In order to keep your pool water clean and hygienic,
you must also add chemicals.
LINER
• Cover the pool when not in use, to prevent any damage to the material on the top rails. Gently clean any dirt deposit on
the top rails with a clean cloth.

DISASSEMBLY AND STORAGE

DRAINING
• To drain the pool, follow the instruction below. Drawings are for illustration purposes only. May not reflect actual product.
Not to scale.
• To drain your pool water, check local regulations for drainage by-laws.
CLEANING
• Rinse the pool liner with tap water, to remove completely any residual of chemical or dirt.
• Leave the pool under the sunlight until it's completely dried.
• To remove completely the remaining water, wipe the pool liner with a dry cloth.
STORAGE
• Remove all accessories; be sure that pool liner, cover, pump and accessories are completely clean and dry before the
storage. If the pool is not completely dry, mold may result and will damage the pool liner during the storage period.
• We strongly recommend to disassemble the pool when the environment temperature is below 10ºC.
• Fold the pool liner only if the environment temperature is above 10ºC / 50ºF. Store the pool in a dry place with a moderate
temperature between 10ºC / 50ºF and 38ºC / 100ºF and position the pool liner and all accessories inside a carton box, to
better protect the PVC material during the winter period.
REPAIR
In the event of a leak, patch your pool using the underwater adhesive repair patch provided. You can find the instructions in
FAQs on the support section of our website, www.bestwaycorp.com/support.
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hydrium 561cs

Inhaltsverzeichnis