Bergstrom bycool green line SLIM FIT DAF Montageanweisungen Seite 33

SLIM FIT
5 CABIN EXTERIOR:
Position the Slim Fit in the hatch gap.
3
Introduce the fastening supports underneath
6
the upholstery and secure to the hexagons with
(4) 8/125x45 screws, (4) Ø8 wide-rimmed flat
washers and (4) Ø8 grower washers without
fully tightening.
6
DAF XF 105 Space Cab (From vehicle manufacture date: 10/09/2012)
7
Position (2) fastening supports as indicated in
the diagram, position (4) Ø25x9x10 spacers;
(4) M8/125x55 screws without fully tightening
(see diagram page 31).
ALL MODELS
DAF XF 105 Space Cab
DAF XF 105 Super Space Cab
Flat part mounts pointing upwards
Caution! When positioning the unit
!
above the hatch gap, check that the
wastewater run-offs are not blocked
by the EPDM seal.
6
Upholstery
Reinforcement
Support
position
Grower washer
Flat wide-flanged washer
33
Ø8 F-M Hexagon
Reinforcement
Spacer Ø25x9x10
M8/125x55 Screw
EN
®
5
Hatch