Transport And Storage - Siemens SIMATIC CPU 410 Kompaktbetriebsanleitung

According to the following standards:
• GB/T 3836.1 (Explosive atmospheres - Part 1: Equipment - General requirements)
• GB/T 3836.3 (Explosive atmospheres - Part 3: Equipment protection by increased safety "e")
UKCA
The modules conform to the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres
Regulations: UKSI 2016 No. 1107
DEKRA 21UKEX0018X
UK importer: Siemens plc
Manchester M20 2UR
Laser
CAUTION
The synchronization submodule contains a laser system and is classified as a "CLASS 1 LASER PRODUCT" according to
IEC 60825-1
Can cause personal injury.
Avoid eye contact with the laser beam. Do not open the housing. Note the information in the Documentation
(https://support.industry.siemens.com/cs/ww/en/ps/26201/man).
4

Transport and storage

Note
Ensure that the permissible transport and storage conditions are observed. Improper storage may affect the service life of the
products. These can be found in the technical specifications for the respective products.
WARNING
Mechanical hazard
Tipping or falling of the housing/control cabinet may result in serious injury or death.
• Only qualified personnel are permitted to participate in transporting the control cabinet.
• Properly secure the control cabinet before every transport.
• Do not attempt to hold or secure the control cabinet yourself during transport.
• Always maintain a safe distance from the control cabinet while it is being transported.
• Never stand under suspended loads.
• Never pass in front of a moving load.
CPU 410 Process Automation
A5E52565095-AA, 01/2023
17