Technical Data; Noise/Vibration Information - Bosch PKS 40 Originalbetriebsanleitung

(3) Hex key
(4) Auxiliary handle (insulated gripping surface)
(5) Spindle lock button
(6) Scale for mitre/bevel angles
(7) Wing bolt for mitre/bevel angle preselection
(8) Wing bolt for parallel guide
(9) Viewing window for "CutControl"
(10) Parallel guide
(11) Retracting blade guard
(12) Adjusting lever for retracting blade guard
(13) Base plate
(14) Wing bolt for preselecting the cutting depth
(15) Cutting depth scale
(16) Chip ejector
(17) Protective guard
(18) Handle (insulated gripping surface)
(19) Saw spindle
(20) Clamping flange
(21) Circular saw blade
(22) Mounting flange
(23) Clamping bolt with washer
(24) 45° cut mark
(25) 0° cut mark
a)
(26) Extraction hose
a)
(27) Pair of screw clamps
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Hand-held circular saw
Article number
Rated power input
Power output
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
CutControl
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Min. tooth thickness/offset
Locating bore
Bosch Power Tools
Hand-held circular saw
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 101 dB(A); sound power level
109 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-5:
Sawing wood: a
Sawing metal: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
PKS 40
over the total working period.
3 603 CC5 0..
Implement additional safety measures to protect the oper-
W 850
ator from the effects of vibration, such as servicing the
W 530
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
-1
min 5300
Fitting
mm 40
Only use saw blades the maximum permitted speed of
u
mm 26
which is higher than the no-load speed of the power
●
tool.
●
Inserting/changing the circular saw blade
mm 135 x 260
Pull the plug out of the socket before carrying out any
mm 130
u
work on the power tool.
mm 122
Wear protective gloves when fitting the saw blade.
u
mm 1.4
Danger of injury when touching the saw blade.
mm 2.7
Do not use abrasive wheels as the application tool un-
u
mm 1.7
der any circumstances.
mm 16
English | 15
kg
(triax vector sum) and uncertainty K
h
2 2
= 4.0 m/s , K = 1.5 m/s
h
2 2
= 4.0 m/s , K = 1.5 m/s
h
1 609 92A 8K8 | (14.02.2023)
PKS 40
2.6
/ II