Technical Data; Noise/Vibration Information; Battery Charging - Bosch GKS 18 V-LI Professional Originalbetriebsanleitung

18 | English
(18) Saw spindle
(19) Mounting flange
a)
(20) Circular saw blade
(21) Clamping flange
(22) Clamping bolt with washer
(23) Markings on protective guard
(24) Battery release button
(25) Fastening screw for dust extraction adapter
(26) Dust extraction adapter
a)
(27) Extraction hose
(28) Cutting depth scale
(29) Clamping lever for cutting depth preselection
a)
(30) Pair of screw clamps
(31) Button for rechargeable battery charge indicator
a)
(32) Battery charge indicator
a)
(33) Guide rail
a)
(34) Connection piece
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Hand-held circular saw
Article number
Rated voltage
A)
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Min. base blade thickness
Max. tooth thickness/offset
Locating bore
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation and
during storage
Recommended rechargeable
batteries
1 609 92A 7T1 | (25.05.2022)
Hand-held circular saw
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C

Noise/vibration information

Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 86 dB(A); sound power level
97 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
a)
Vibration total values a
determined according to EN 62841-2-5:
Sawing wood: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
GKS 18 LI-V
power tool is used for other applications, with different ap-
3 601 F6H 0..
plication tools or is poorly maintained, the vibration level
V 18
and noise emission value may differ. This may significantly
-1
min 3900 increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
mm 51
times when the tool is switched off or when it is running but
mm 40
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
●
over the total working period.
mm 146 x 272
Implement additional safety measures to protect the oper-
mm 165
ator from the effects of vibration, such as servicing the
mm 160
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
mm 1.7
mm 1.0
Fitting
mm 2.6
mm 20 u
B)
kg 3,4–4,1
°C 0 to +35

Battery Charging

u
°C –20 to +50
Note: The battery is supplied partially charged. To ensure
GBA 18V...
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
GBA 18V 4.0Ah.
(triax vector sum) and uncertainty K
h
2
= 3 m/s , K = 1.5 m/s
h
Only use saw blades the maximum permitted speed of
which is higher than the no-load speed of the power
tool.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
GKS 18 LI-V
GAL 18...
GAX 18...
GAL 36...
2
Bosch Power Tools