Klarstein AMAZONIA 6 SMART Bedienungsanleitung Seite 58

EN
58
What you should bear in mind when loading
Remove larger food scraps. Soak burnt-on residues in pans beforehand. It is not
necessary to rinse the dishes until clear beforehand.
Place the items in the dishwasher as follows:
• Place cups, glasses, pots and pans in the dishwasher with the inside facing
down.
• Curved items, or items with indentations, should be placed in the dishwasher
at an angle to allow the water to drain away.
• Load the objects inside the device in such a way that they cannot fall over.
• Make sure that the spray arms can rotate freely and are not obstructed by
dishes or protruding objects.
• Load hollow objects such as cups, glasses, pans, etc. with the opening facing
downwards so that no water can collect in the container or on the bottom of
the dishes.
• Do not wash small items in the dishwasher as they could easily fall out of the
basket.
• Make sure that dishes and cutlery do not overlap or cover each other.
• To avoid glass breakage, glasses must not touch each other.
• The upper basket is intended for more delicate and lighter dishes such as
glasses, coffee and tea cups.
• Knives with a long blade stored upright are a potential hazard!
• Long and/or sharp cutlery, such as carving knives, must be placed horizontally
in the upper basket.
• For best results and to reduce energy consumption, do not overload the
dishwasher.
Note: The washed items are hot! To avoid damage, do not remove glass
and cutlery from the dishwasher until about 15 minutes after the end of the
programme.