Proper Use; Technical Data - EINHELL GE-HM 18/38 Li Originalbetriebsanleitung

•
Push bar extension (2-piece)
•
Push bar bottom
•
Screw M6x40 (4x)
•
Wing nut M6 (4x)
•
Fastening screw (2x)
•
Original operating instructions
•
Safety information

3. Proper use

The lawn mower is intended for private use i.e. for
use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the equipment is
primarily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Important. Due to the high risk of bodily injury to
the user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vege-
tation, planted roofs, or balcony-grown grass, to
clean (suck up) dirt and debris off walkways, or
to chop up tree or hedge clippings. Moreover, the
lawn mower may not be used as a power cultiva-
tor to level out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind, unless they have been expressly per-
mitted by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GE_HM_18_38_Li_SPK9.indb 20 Anl_GE_HM_18_38_Li_SPK9.indb 20
GB

4. Technical data

Voltage ....................................................18 V d.c.
Speed of mower spindle: ........................ 890 rpm
Protection type: ............................................IPX1
Protection class: ............................................... III
Weight: .....................................................10.8 kg
Cutting width: ............................................ 38 cm
Volume of catch bag: ............................... 45 liters
Sound pressure level L
Uncertainty K ................................... 2.5 dB (A)
pA
Sound power level L : .................... 85.68 dB(A)
WA
Uncertainty K : ................................ 1.93 dB(A)
WA
Guaranteed sound power level L
Vibration at the handlebar: .................. ≤ 2.5 m/s
Uncertainty K: .........................................1.5 m/s
Cutting height adjustment: .....14-38 mm; 4 levels
Important!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power-X-
Change series!
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Sound and vibration values were measured in ac-
cordance with the standards EN ISO 3744:1995,
ISO 11094:1991 and EN ISO 20643:2008.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
- 20 -
....................... 72 dB(A)
pA
: ...... 89 dB(A)
WA
2
2
30.08.2022 14:32:55 30.08.2022 14:32:55