Take-Off; Reverse Launch - SUPAIR LEAF3light XXS Betriebsanleitung

Glider user's manual | LEAF3 Light
The design team has strived to produce the LEAF3 Light wing with optimum inflating abilities in all flyable conditions. Whether it be
in light or high winds you will enjoy its docile behavior while launching. However before the first flight, practice ground-handling to
become familiar with your new glider. It is possible to inflate in a front- or reversed-launch method.
Forward launch
To inflate the glider grab the upper ends of the "A" risers with your hands and progressively move foreward guiding the glider
upward. Once the wing is flying overhead, apply brakes as necessary, look up and perform a visual check before accelerating to take
off.

Reverse launch

If the wind speed is sustained and permits it, we will advise you to use a reversed inflation method more adapted to conduct a better
visual check. Face the wing and grab the "A" risers. With a light pull and adapted rearward walking motion, inflate your wing. Once
the glider is stable overhead, turn around, look up once more to check that all is ok. before running down the slope and takeoff.
Note: it is not necessary to use the "A" risers to inflate the wing.
Caution !
Before take-off, ensure for the airspace to be clear in front, around and above you with weather conditions matching your flying skill
level..
FR EN DE

Take-off

SUPAIR | LEAF3 Light | page 11