Pre-Flight Preparation - SUPAIR LEAF3light XXS Betriebsanleitung

FR EN DE
Glider user's manual | LEAF3 Light

Pre-flight preparation

The LEAF3 Light glider was designed for pilots in progression.
To discover your new wing, we will advise you to conduct your first small flights in calm conditions on a school training hill or a fami-
liar site you are used to flying with your own harness.
Unfold the glider and place it on its upper surface in an arc.
Separate the A,B,C risers and the brakes, be certain for the risers and lines not to have any twists or knots or be hooked to a branch,
stone etc...
Caution !
It vital to conduct a thorough pre-flight check and have the harness properly connected to the glider prior each takeoff.
Run through the following procedure prior each takeoff :
- Harness or carabiners do not show signs of wear and tear.
- The reserve parachute container is correctly closed and that the handle is in the correct position
- Your personal settings have not been changed
- The wing is properly connected to the risers with all links securely tightened and locked in place.
- The wing is properly connected to the harness without any riser twist.
- You are securely connected to the harness with the leg and chest strap buckles closed, self-locking carabiners locked.
- Your are wearing your helmet and it is properly fastened.
SUPAIR | LEAF3 Light | page 10